Qirod QD100 Series - Page 160

158
setting
f901 Proportional gain 0.01~100.0
varies
by
model
○
f902 Integral gain 0.01~100.0
varies
by
model
○
f903 Differential gain 0.00~2.55 0.00 ○
f904
PID control waiting
time
0~2400 s 0 ○
f905
PID regulator
deviation input
signal negation
0
：
disable
1
：
enable
0 ○
f906
Sleep mode
awakening
hysteresis
bandwidth
0.0 Hz ~f007 0.2 ○
f907
Sleeping mode
awakening
threshold based on
PI deviation
0.0 Hz ~f007 0.0 ○
f908
Sleeping mode
awakening
threshold based on
PI feedback
0.0 Hz ~f007 0.0 ○
f909
sleeping mode
action
0: Motor slowdown
to a stop.
1: Motor keep
running at lower limit
frequency.
0 ●
f910 wake up delay 0~600.0s 0.0 ●
f911 Auto wake up level
0~100.0% 0.0 ○
f912 factory reserved
f913 factory reserved
Note 1：in the volume of “WRT”，“○”：means writable at stop or running status.；“●”：
means unwritable at stop or running status；