Qirod QD100 Series - Page 161

159
Note 2：we can obtained modbus parameter address by replacing ’F’ of ‘0’. E.g. f908’s
address is 0x0908。
NO. Parameter Name
Description
u000
CPU1 Version
E.g: , G-type, v= g; P-type, v= p
；
u001
Operation
frequency
Value is displayed in Hz/free unit. See f604.
u002
Direction of
rotation
Forward run, Reverse run.
u003
frequency
command value
Value is displayed in Hz/free unit. See f604.
u004
load current The inverter output current (%/A) is displayed.
u005
input voltage
(AC RMS)
The inverter input voltage (
200
V) is displayed.
u006
output voltage
(AC RMS)
The inverter output voltage command (
200
/V) is
displayed.
u007
Input terminal
status indicated
u008
Output terminal
status indicated
u009
cumulative
operation time
(0.01=1 hour, 1.00=100 hours)
u010
Output speed
Displays the motor speed ( min-1) by calculating with
output frequency and pole numbers.
u011
Rated current The rated current of the inverter (A) is displayed.
u012
Torque current The torque current (%/A) is displayed.
u013
Load current
The inverter output current (load current) (%/A) is
displayed.
u014
Torque The torque (%) is displayed.
v
100
0
1
relay 1
：
OFF
transistor
}
i
}
i
：
ON