Qirod QD100 Series User Manual

6
Running model selection
QD100 inverter include four running models: Powering-on default mode, Parameter
setting mode, Status monitoring mode and Parameter verifying mode. Any mode can be
realized by the MODE Key, showed as Figure 4.2:
Figure 1.2 Structure of Inverter Mode switch
<1>: when F618=1, show parameter setting mode
Powering-on default mode
The display data is the current output frequency under Powering-on default mode, so
directly use ▲or▼ key to modify the digital frequency setting, then press the ENT key to
save the modified data and return Powering-on default mode, or press the ESC key to
give up the modification and return the Powering-on default mode.As showed as Figure
4.3
Figure 1.3 Powering-on default mode Navigation
Power -
on default mode Parameter setting mode
State
monitoring mode Parameter check mode
0.0
--fo-
u
000
MODE
MODE
MODE
MODE
-f0-
Power
-
on
default mode
MODE
ESC
0.5
或
Save setting
Frequency setting
50.0 .
ESC
E
NT
Abort
setting
0.0

Qirod QD100 Series Specifications

General

Brand	Qirod
Model	QD100 Series
Category	DC Drives
Language	English