Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 C 10-53
Port Link Settings Menu
2. CNA iSCSI Configuration2. Port Configuration<port selection>1. Port Link Settings Menu
From the Port Link Configuration menu, select the Port Link Settings Menu
option to open the Port Link Settings Menu with options to display the active link
configuration, display the configured link configuration, and save changes. For
example:
Port Link Settings Menu
=======================================================
CNA : 0 Port: 2
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EE.5
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EE
IPv4 Address : 192.168.1.45
=======================================================
1: Display Active Link Configuration
2: Display Configured Link Configuration
3: Configure Link Configuration
4: Save changes and reset HBA (if necessary)
Display Active Link Configuration Select this option to view the active link
configuration. For example:
------------------------------------------------------------------
Connection Type : Fibre
Portal Duplex : Full Duplex
Portal Flow Control : on
Portal Link Speed : 10 Gbps
------------------------------------------------------------------
Display Configured Link Configuration Select this option to view the
configured link configuration. For example:
------------------------------------------------------------------
This operation is not available for this adapter (8242).
------------------------------------------------------------------

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English