10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
10-54 SN0054667-00 C
Configure Link Configuration Select this option to configure the link. For
example:
------------------------------------------------------------------
This operation is not available for this adapter (8242).
------------------------------------------------------------------
Save changes and reset HBA Select this option to save changes and reset the
adapter.
Edit Configured Port Settings Menu
2. CNA iSCSI Configuration2. Port Configuration<port selection>2. Edit Configured Port Link Settings Menu
From the Port Link Configuration menu, select the Edit Configured Port Settings
Menu option to open the Port Link Settings Menu with options to view configured
port settings, change the port iSCSI alias, configure port firmware settings, restore
legacy 4010 default port settings, and save changes. For example:
Port Link Settings Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EA.4
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EA
IPv4 Address : 192.168.1.45
=======================================================
1: Display Configured Port Settings
2: Change Port iSCSI Alias Name
3: Port Firmware Settings Menu
4: Legacy 4010 Restore Default Port Settings
5: Save changes and reset HBA (if necessary)
To Next Page
Loading...
Need help?
General
