10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
10-56 SN0054667-00 C
Port Firmware Settings Menu Select this option to open the Port Firmware
Settings menu with options to view configured port settings, edit a specific port
setting, configure iSCSI settings, configure firmware settings, configure device
settings, configure basic settings configure advanced settings, configure IPV6
settings, configure IPv6 TCP settings, save changes, and refresh adapter data.
For example:
Port Firmware Settings Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EA.4
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EA
IPv4 Address : 192.168.1.45
=======================================================
1: Display Configured Port Settings
2: Edit A Specific Port Setting
3: Configure ISCSI Settings
4: Configure Firmware Settings
5: Configure Device Settings
6: Configure Basic Settings
7: Configure Advanced Settings
8: Configure IPv6 Settings
9: Configure IPv6 TCP Settings
10: Save changes and reset HBA (if necessary)
11: Refresh
To Next Page
Loading...
Need help?
General
