Qlogic QConvergeConsole CLI 2400 Series - Page 261

10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 C 10-57
 Display Configured Port Settings—Select this option to view configured
port settings. For example:
-------------------------------------------------------------
*** Displaying ISCSI Settings inst=1 ***
Force_Negotiate_Main_iSCSI_Keys : off
iSCSI_Send_Markers : off(*)
iSCSI_Header_Digests : off
iSCSI_Data_Digests : off
iSCSI_Immediate_Data : on
iSCSI_Initial_R2T : off
iSCSI_Data_Seq_In_Order : on(*)
iSCSI_Data_PDU_In_Order : on(*)
iSCSI_CHAP_Auth : off(*)
iSCSI_Bidi_CHAP_Auth : off(*)
iSCSI_Snack : off
iSCSI_Discovery_Logout : on
iSCSI_Strict_Login : off
iSCSI_Error_Recovery_Level : 0(*)
iSCSI_Alias :
.
.
.
Values noted with (*) are read only.
-------------------------------------------------------------
 Edit A Specific Port Setting—This option is currently not supported.
 Configure ISCSI Settings—Select this option to configure iSCSI settings.
For more information about these settings, refer to Table 6-3. For example:
Force_Negotiate_Main_iSCSI_Keys [off] :
iSCSI_Header_Digests [off] :
iSCSI_Data_Digests [off] :
iSCSI_Immediate_Data [on] :
iSCSI_Initial_R2T [off] :
iSCSI_Snack [off] :
iSCSI_Discovery_Logout [on] :
iSCSI_Strict_Login [off] :
iSCSI_Alias [] :