10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
10-58 SN0054667-00 C
Configure Firmware Settings—Select this option to configure firmware
settings. For example:
FW_ZIO_Enable_Mode [off] :
AFW_Device_Timeouts [on] :
AFW_Delayed_Ack [off] :
AFW_AutoConnect [on] :
Configure Device Settings—Select this option to configure device
settings. For more information about these settings, refer to Table 6-3. For
example:
Large_Frames [off] :
ExeThrottle [0] :
FirstBurstLen [256] :
KeepAliveTO [30] :
MaxBurstLen [512] :
MaxOutstandingR2T [1] :
IPv4TOS [0] :
IPv4TTL [64] :
Configure Basic Settings—Select this option to configure basic settings.
For more information about these settings, refer to Table 6-3. For example:
iSCSI_Discovery_Logout [on] :
iSCSI_Strict_Login [off] :
TCP_DHCP [off] :
TCP_Nagle [off] :
iSCSI_Alias [] :
IP_Address [192.168.1.45] :
IP_Subnet_Mask [255.255.255.0] :
IP_Gateway [0.0.0.0] :
Task_Management_Timeout [10] :
ENABLE_IPV4 [on] :
ENABLE_IPV6 [off] :
LOC_LINK_AUTO [off] :
ROUTABLE_AUTO [off] :
LDROUTER_AUTO [off] :
IPv6_Addr_Local_link [fe80::] :
ENABLE_4022IPV4 [on] :
To Next Page
Loading...