10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 C 10-75
Target Discovery Menu
2. CNA iSCSI Configuration4. Target Configuration<port selection>10. Target Discovery Menu
Select the Target Discovery Menu option to open the Target Discovery Menu
with options to display targets, add a send target, mark a send target for
rediscovery, remove targets, log in to a target and make it persistent, duplicate
targets, view and configure iSNS settings, save changes, and refresh the adapter
data. For example:
Target Discovery Menu
=======================================================
CNA : 0 Port: 1
SN : AFE1028C03899
CNA Model : QLE8242
iSCSI Name : iqn.2000-04.com.qlogic:isp8214.000E1E0495EA.4
FW Version : 4.7.31
iSCSI MacAddr : 00:0E:1E:04:95:EA
IPv4 Address : 192.168.1.45
=======================================================
1: Display Send Targets
2: Display Discovered Targets
3: Add a Send Target
4: Mark Send Target for re-discovery
5: Remove a Send Target
6: Login and persist a discovered target
7: Duplicate a Persistent Target
8: Duplicate a Discovered Target
9: Remove Discovered Target
10: Display iSNS Settings
11: Configure iSNS
12: Save changes and reset HBA (if necessary)
13: Refresh
Display Send Targets Select this option to view the persistent send target list.
For example:
------------------------------------------------------------------
Persistent Send Target List
------------------------------
1. hba_no: 1 IP: 192.168.30.85
------------------------------------------------------------------
To Next Page
Loading...