Qlogic QConvergeConsole CLI 2400 Series - Page 280

10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
10-76 SN0054667-00 C
Display Discovered Targets Select this option to view discovered target
devices. For example:
------------------------------------------------------------------
Persistent Target List
---------------------------------
1. Target ID: 3 hba_no: 1 IP: 192.168.1.11 Port: 3260
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.b2
Alias: 0607.b2 ISID: 000e1e045242
State: Session Active
2. Target ID: 4 hba_no: 1 IP: 192.168.1.10 Port: 3260
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.a2
Alias: 0607.a2 ISID: 000e1e045242
State: Session Active
------------------------------------------------------------------
Add a Send Target Select this option to add a send target. For example:
Do you want this new send target to be auto-login and persistent?y
IPv6 Target? [off]:
TGT_TargetIPAddress [0.0.0.0] :192.168.1.100
Does the send target require CHAP?y
CHAP TABLE
Entry: 1
Name: chap_target1
Secret: q1w2e3r4t5y6
Entry: 2
Name: chap_target2
Secret: a1s2d3f4g5h6
Entry: 3
Name: chap_target3
Secret: z1x2c3v4b5n6
CHAP Entry Number (0 for no CHAP) : 2
Do you want to have bidi authentication? [y/n]: y
Mark Send Target for re-discovery Select this option to mark a send target for
rediscovery.