10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
SN0054667-00 C 10-77
Remove a Send Target Select this option to remove a send target. For example:
Persistent Send Target List
------------------------------
1. hba_no: 1 IP: 192.168.1.11
2. hba_no: 1 IP: 192.168.1.100
Enter the instance number or ALL:2
Login and persist a discovered target Select this option to log in and make a
discovered target persistent. For example:
Enter the instance number or ALL:
Duplicate a Persistent Target Select this option to duplicate a persistent target.
Duplicate a Discovered Target Select this option to duplicate a discovered
target. For example:
Enter the instance number or ALL:
Remove Discovered Target Select this option to remove a discovered target.
Display iSNS Settings Select this option to view iSNS settings. For example:
------------------------------------------------------------------
iSNS : Disabled.
------------------------------------------------------------------
Configure iSNS
Select this option to configure iSNS. For example:
Use iSNS[off]: on
Set IPv4 or IPv6 address:
1. IPv4 Address: 0.0.0.0
2. IPv6 Address: ::
Select 1 or 2 : 1
iSNS IPv4 Address [0.0.0.0]: 10.10.10.10
iSNS Port Number [3205]:
Save changes and reset HBA Select this option to save changes and reset the
adapter.
Refresh Select this option to refresh the adapter data.
To Next Page
Loading...
Need help?
General
