10–Converged Network Adapter Interactive Commands
CNA NIC Configuration
SN0054667-00 C 10-87
Display Configured Port Settings
3. CNA NIC Configuration2. NIC Port Setting Configuration<port selection>1. Display Configured Port Settings
Select the Display Configured Port Settings option to view configured port
settings. For example:
IPv4_Checksum_Offload_Enable : RxTx
IPv4_TCP_Checksum_Offload_Enable : RxTx
IPv6_TCP_Checksum_Offload_Enable : RxTx
IPv4_UDP_Checksum_Offload_Enable : RxTx
IPv6_UDP_Checksum_Offload_Enable : RxTx
IPv4_Large_Send_Offload_v1_Enable : on
IPv4_Large_Send_Offload_v2_Enable : on
IPv6_Large_Send_Offload_v2_Enable : on
Receive_Side_Scaling_Enable : on
Jumbo_Frames_MTU_9000_Enable : off
LOCAL_Administered_Address_MAC : 00:0e:1e:04:95:ec
Port_Alias : None
Port_Wake_On_LAN_Option : Disabled
Port_PXE_Enable : off
Chimney_Mode : CPU
Large_Receive_Offload : on
Priority_Tagging : Rx Tx Enabled
Flow_Control : Rx Tx Enabled
Vlan_Tagging : on
Receive_Side_Scaling_Ring : 2
Health_Monitoring : on
Max_Jumbo_Buffers : 4096
Receive_Buffer_Count : 16384
Transmit_Buffer_Count : 1024
TCP_Connection_Offload_IPv4 : off
Completion_Queue_Size : 16384
Interrupt_Moderation : off
VLAN_ID : 0
To Next Page
Loading...
Need help?
General
