Raider 50 - Removing Propeller Shaft Housing Assy

Lower Unit
RO
12) Removing Propeller Shaft Housing
1
1.
2.
2
Ass’y
Loosen and remove bolts 1.
Use propeller shaft housing puller to pull out propeller
shaft housing to the position where O ring of the housing
can be removed.
Propeller Shaft Housing Puller Ass’y 2 :
P/N. 353-72252-0
3
3 Propeller Shaft Housing Ass’y
3. Hold propeller shaft and remove propeller shaft housing
ass’y.
When pulling out propeller shaft housing ass’y,
remove clutch push rod and steel balls together
with the housing ass’y.
6-36
2st 50D2 2011