Fuel System
4. Inspection Items
1) Removing Carburetors
WARNING
Before working on fuel system, make sure
to
disconnect stop switch lanyard, or
electric sparks can occur, possibly igniting
fuel or making fuel to explode.
CAUTION
1
To prevent fuel from dripping on the floor,
use a vessel to catch the fuel.
1. Remove Intake silencer 1 from carburetors.
Refer to <Removing Intake Silencer and Carburetors> in
Chapter 5.
2
2. Remove each drain screws 2 to drain fuel, and then remove
choke link rod 3 and carburetor link rod 4 from each
carburetors.
2
3
4
2
3. Disconnect fuel hoses 5, then remove carburetors from
power unit.
5
4-18
2st 50D2 2011
To Next Page
Loading...