Raider 50 - Replacement of Anode

Maintenance
GB
16) Replacement of Anode
1. Dirt on Anode and Trim Tab
Check if grease or oil is adhered to the components.
Clean if necessary.
CAUTION
Anode protects outboard motor from
galvanic corrosion. Do not paint or apply
1
grease or oil to anode. Doing so disables
the anode.
2. Check anode 1, 2 a and trim tab 3 for deterioration.
Replace anode (or trim tab) if volume is reduced to 2/3 of
new part.
2
3
3-36
2st X50D2 2011