Service Information
4) Fuel and Fuel Line
Check that fuel bladder contains sufficient amount of pre-
mixed gasoline, fuel line is connected and does not leak.
CAUTION
Supply only unleaded regular octane gasoline
into fuel tank. Use fuel mixed with oil.
Fuel and oil mixing ratio is 50:1. For breaking
period, 25:1 mixture shall be used.
5)
Installation of Outboard Motor (Rigging)
Check that outboard motor is fixed on the hull with
Raider Transom plate. Check location of anti-ventilation plate
relative to boat bottom.
Test-run to determine the best installation height.
Anti-ventilation plate standard position a :
5 - 25 mm (0.2 - 1.0in) below boat bottom
a
a 5-25 mm(0.2-1.0 in)
Heavy Fuel requires 50:1 oil mixing plus
one can Raider additive into a six gallon
bladder.
To Next Page
Loading...