Raider 50 - Intake Silencer • Carburetor

Fuel System
Intake Silencer • Carburetor
Ref.
P/L Fig. 4
LIT
LIT
1342
1342
LIT
LIT
1342
1342
Ref.
No.
Description Q'ty Remarks Description Q'ty Remarks
No.
1 Bolt 5-16 6 16 Adjust Screw 3
2 Gasket 1 Do not reuse. Seal Rubber 17 Float Chamber 2 Upper, Center X 2
3 Intake Silencer Cover 1 18 Float Chamber Gasket 3
Do not reuse.
O-Ring
4 Tapping Screw 5-30 7 19 Bolt 3
5 Carburetor Ass'y 1 3LC 5 Upper 20 Gasket 3
Do not reuse.
X 3
6 Carburetor Ass'y (Second) 1 3LC 5 Center 21 Main Nozzle 3
7 Main Jet (#138) 3 22 Carburetor Cover 3
8 Slow Jet (#80) 3 23 Carburetor Cover Gasket 3
9 Plug 3 24 Screw 6
10 Float Valve 3 25 Carburetor Ass'y (Third) 1 3LC
11 Float Arm Pin 3 26 Pump Cover 1 Lower
12 Float 3 27 Screw 4 Lower
13 Screw 3 28 Pump Cover Gasket 1 Lower
14 Stop Screw 1 Upper X 1 29 Check Valve 2 Lower
15 Spring 2 Upper X 2, 30 Screw 2 Lower
Center X 1, Lower X 1 31 Nut 2 Lower
4-6
2st 50D2 2011