Service Information
å
∫
4. Pre-delivery Inspection
1) Tiller Handle
å Check installations for clattering and play.
∫ Adjust steering friction.
ç Check throttle grip for movement. (full open/full close).
∂ Adjust throttle friction.
ç ∂
2) Gear Shift
Shift into forward (F), back to neutral (N) and then shift
into reverse (R) to check that the shift operations are
smooth.
DANGER
Remove lock plate (of stop switch lanyard)
from stop switch before inspecting of gear
shift and throttle operations. This will
prevent engine from accidental starting.
Turn propeller then operate shift lever, to easily
when will not shifting.
3) Gear Oil
Check quantity of gear oil.
Gear Oil :
OIL
GEAR
GEAR
MX50D2 : 500 cm
3
(16.9 fl.oz)
MWX50D2 : 700 cm
3
(23.65 fl.oz)
Leaking of some oil from plug hole as plug is
removed indicates that gear case is filled with
specified quantity of gear oil.
To Next Page
Loading...