5
Select the Schedule Attributes you would like for the new schedule by placing
checks in the checkboxes next to the following options:
• FLO-MANAGER
Maxicom
2
will calculate the optimum sequence for each station based
upon the system’s hydraulic capacity.
• Automatic Send
Maxicom
2
will automatically send the schedules to the CCU(s) at a
predetermined time each day.
• Protected
Does not allow Maxicom
2
to erase this schedule when performing a
SEND or a Rain Shut Down. This setting is good for non-irrigation
schedules.
Schedule Wizard
Click on the Next button.
The Schedule Editor window is displayed.
Creating and Editing a Site Schedule
6.5
To Next Page
Loading...
