Discharge End
To Unit
Side Filter Rail
Bottom Panel
Bottom Panel
2030
2020
Outside Inside
Inlet End
Bottom Panel
For Model 2020: Attach the side filter rail to the bottom panel
with five TEK self-tapping screws. Line up filter rail holes with
provided holes near the discharge end of the filter section
panel.
For Model 2030: Attach the side filter rail to the bottom panel
with seven TEK self-tapping screws. Line up with provided
holes near the inlet end of the filter section.
Description Part Number
Side Filter Rail 13X05031
TEK Screw 13404
To Next Page
Loading...
