B-SERIES INSTALLATION, OPERATION AND SERVICE MANUAL
52 of 147
Step 12.2.12
Step 12.2.13
Moisture Limiter Side Cover
Attach side cover of moisture limiter frame to the left side
of the inlet hood rain gutter using eight TEK screws.
Attach to the bottom pan assembly with two #10-24 x ½"
bolts and #10-24 nuts.
Description Part Number
Side Cover (ML) 13505099
TEK Screw 13404
#10-24 x ½" Bolt 27000
#10-24 Nut 26098
Inner Support
RailMoisture Limiter
Side Cover
Place the moisture limiter inner support rail under the top
flange of the moisture limiter frame side cover and to the top of
the inlet hood. Attach to the top of the inlet hood using nine
#10-24 x ½" bolts and nine #10-24 nuts. Attach to the left side
of the frame using two #10-24 x ½" bolts and two #10-24 nuts.
Description Part Number
Inner Support Rail 13505097
TEK Screw 13404
#10-24 x ½" Bolt 27000
#10-24 Nut 26098
To Next Page
Loading...
