Raritan PM Series User Manual

Chapter 3: Using the Web Interface
154
Field/setting
Description
Force password
change on next
login
When selected, a password change request
automatically appears when next time the user
logs in.
For details, see
Changing Your Password
(on
page
83).
SSH:
You need to enter the SSH public key only if the public key authentication
for SSH is enabled. See
Changing SSH Settings (on page 198).
1. Open the SSH public key with a text editor.
2. Copy and paste all content in the text editor into the SSH Public Key
field.
SNMPv3:
The SNMPv3 access permission is disabled by default.
Field/setting
Description
Enable SNMPv3
Select this checkbox when intending to permit the
SNMPv3 access by this user.
Note: The SNMPv3 protocol must be enabled for
SNMPv3 access. See
Configuring SNMP Settings
(on page 194).
Security Level Click the field to select a preferred security level
from the list:
 None: No authentication and no privacy. This is
the default.
 Authentication: Authentication and no privacy.
 Authentication & Privacy: Authentication and
privacy.
• Authentication Password: This section is configurable only when
'Authentication' or 'Authentication & Privacy' is selected.
Field/setting
Description
Same as User
Password
Select this checkbox if the authentication
password is identical to the user's password.
To specify a different authentication password,
disable the checkbox.

Raritan PM Series Specifications

General

Brand	Raritan
Model	PM Series
Category	Measuring Instruments
Language	English