Appendix D: RADIUS Configuration Illustration
3. Under "RADIUS Clients and Servers," right-click RADIUS Client and
select New RADIUS Client. The New RADIUS Client dialog appears.
4. Do the following to add your BCM2 to NPS:
a. Verify the "Enable this RADIUS client" checkbox is selected.
b. Type a name for identifying your BCM2 in the "Friendly name"
field.
c. Type
192.168.56.29
in the "Address (IP or DNS)" field.
d. Select
RADIUS Standard
in the "Vendor name" field.
e. Select the
Manual
radio button.
To Next Page
Loading...
Need help?
General
