4 | How to work with the unit
16 / 100 Operating instructions
Energy optimisation
The symbol will appear in the footer on the start screen as soon as there is a heating request that cannot be
met.
The purpose of energy optimisation is to make maximum use of the electrical power in the kitchen.
Power failure
In the event of a power failure, the following symbol will be displayed in the footer.
It will go out when a new cooking application is selected. To do this, return to the start page.
The duration of the power failure will determine whether a cooking path will continue or restart and this will
depend on the respective cooking path and cooking method.
Example:
If there is a power cut during a low temperature cooking process, the cooking process will be interrupted.
If the power cut lasts less than 15 minutes, the cooking process will continue.
If the power cut lasts longer than 15 minutes, the unit will switch to standby mode after the power cut. You must
restart the cooking process to finish cooking the food.
4.3.3 Help displayed on the unit
Help displayed on the unit
Selecting the question mark icon will take you to the integrated help function in the cooking system. Here you will
find a digital description of how to use your cooking system. The help function is context-sensitive, so the help
function for the current screen content is always shown first. The help function also provides detailed information
on each cooking method, as well as useful tips.
4.3.4 Actions
The following symbols can be displayed regardless of whether or not you are cooking food.
Symbol Function
Open pan lid automatically [}18]
Close pan lid [}18]
Tilt pan [}20]
Lower pan [}20]
Automatic water filling [}18]
Open drain valve [}20]
Close drain valve [}20]
4.4 Interacting with the unit
NOTICE
Incorrect operation of the display
The display could be damaged if you operate it with a pointed or sharp object.
1. Only operate the unit with your fingers.
4.4.1 Moves
You can operate your unit with a few simple moves.