4 | How to work with the unit
Operating instructions 23 / 100
Food of different sizes
1. First insert the core probe into the smallest piece of the food.
2. Once the desired core temperature has been reached, remove the small pieces of food from the core probe
and from the pan.
3. Then insert the core probe into a larger piece of the food and continue the cooking process with the Move
option.
Core temperature probe not recognised
a The symbol will be displayed:
1. Place the core probe as described in the manual into the product.
2. Confirm the correction.
>> The cooking process is not performed correctly. If you do not confirm the correction, the cooking process will
be aborted and you will have to start again. Some cooking paths, such as low temperature boiling, will
continue despite the error.
4.12 Using the hand shower
The hand shower has two adjustable spray patterns, spray (A) and jet (B).
WARNING
Water vaporises explosively if poured in hot fat or oil
There is a risk of explosion if you extinguish smoking fat or oil with water.
1. Never pour water into hot oil or fat.
2. In the event of fire, close the pan lid. This will remove the oxygen from the fire. Turn off the unit. If the fire
has spread, use a fire extinguisher that is suitable to extinguish a fire. Never use a water or foam
extinguisher to extinguish the fire.
CAUTION
The hand shower and the water coming out of the hand shower can reach over 60 °C
You could burn yourself if you touch hot components or come in contact with hot water.
1. Wear protective gloves while working with the hand shower.
CAUTION
Germ formation in the water pipe
If you do not use the hand shower daily, germs may form in the water line.
1. Rinse the hand shower through with water in the morning and in the evening for 10 seconds.
To Next Page
Loading...
Need help?
General
