12 | Kitchen management
82 / 100 Operating instructions
n
Push notifications
Whether it’s a loading, ready-to-eat or service message, you will receive all the information you need in real
time, no matter where you are.
n
Transfer and manage cooking paths
Automatically transfer tried and tested cooking paths to all units in your business.
n
Automatic software updates
Software updates are always provided to you free and automatically.
You will also find extensive recipe libraries, tips and tricks from our professionals as well as a variety of training
videos at connectedcooking.com.
12.4.1 Connect unit with ConnectedCooking
When you connect your unit to ConnectedCooking, the following features are available:
n
Transfer HACCP data automatically to ConnectedCooking [}79]
n
Automatically transferring service data to ConnectedCooking [}90]
a You have established a network connection.
a You have registered atconnectedcooking.com.
1. Press the button
2. Press the button ConnectedCooking
3. Next to Connect, press the button: Register
4. Enter your registration details or select the registration via QR code.
> After a short wait, a nine-digit PIN and a QR code are displayed. If you do not have a smartphone with you,
you can register at www.connectedcooking.com. If you have a smartphone with you, you can scan the QR
code.
Registration without smartphone
1. Write down the PIN.
2. Log on towww.connectedcooking.com.
3. Click on the symbol: Asset management
4. Select: Unit overview
5. Click on the symbol: Red cross with +
6. In the Name field, enter a unit name.
7. In the activation key field, enter the PIN displayed on the unit.
>> After a short time, the unit will be displayed in the unit overview of ConnectedCooking.
>> The display will show that the unit is connected with the ConnectedCooking server. The symbol appears in the
footer:
>> You will receive an e-mail confirming that the unit has been successfully registered.
Registration with smartphone
a You have installed an app on your smartphone that you can use to scan QR codes.
a You have installed the ConnectedCooking app on your smartphone.
1. Scan the QR code.
>> After a short time, the unit will show that the unit is connected with the ConnectedCooking server. The
symbol appears in the footer:
>> The unit will be displayed in the unit overview of ConnectedCooking.
>> You will receive an e-mail confirming that the unit has been successfully registered.