11 | Settings
68 / 100 Operating instructions
2. Press the button Light
11.3.1 Display brightness
Here you can adjust the display brightness on a scale from 0 - 100%.
1. Press the button Display brightness
2. Select the desired value on the scale or set it using the dial.
>> The display brightness is immediately adopted.
Automatic dimming
1. Press the button Automatic dimming
>> You can now switch the automatic dimming on or off.
Dim after x min
1. Press the button Dim after x min
>> You can now set after how many minutes the automatic dimming should be activated.
Screen protector
1. Press the button Screensaver
>> You can now switch the screen saver on or off.
Activate screensaver after x min
1. Press the button Activate screensaver after x min
>> You can now set after how many minutes the screen saver should be activated.
11.4 Sound
1. Press the button
2. Press the button Sound
11.4.1 Master volume
Here you can set the master volume of the unit on a scale of 0 - 100%.
1. Press the button Master volume
2. Select the desired value on the scale.
>> The master volume is immediately adjusted.
11.4.2 Loading/calls for action
Here you can set which sound or melody you would like to sound when you want to either load the unit or ask it
to perform an action. You can choose from 25 options.
1. Press the button Loading/action request
2. Press the button Sound
3. Press on the desired sound.
> The sound will play.
4. To apply the setting, press the following button in the icon bar:
>> You will return to the overview.
11.4.3 Program step end
Here you can set which sound or melody you would like to sound when a program step is completed . You can
choose from 37 options.
To Next Page
Loading...
Need help?
General
