4 | How to work with the unit
Operating instructions 21 / 100
1. To open the pan drain valve, press and hold the button:
> The pan drain valve will open.
2. To close the pan drain valve, press the button:
> The pan drain valve will close.
> The button will be displayed:
If the pan drain valve is opened and you call up a manual mode or an intelligent cooking process, the pan drain
valve will close automatically.
Units with pressure cooking (optional)
You cannot open the pan drain valve in the following cases:
n
You are deep-frying or have deep-fried food and did not fully tilt the pan afterwards.
n
The pan is too hot.
1. To open the pan drain valve, press and hold the button:
> The pan drain valve will open.
2. To close the pan drain valve, press the button:
> The pan drain valve will close.
> The button will be displayed:
If the pan drain valve is opened and you call up a manual mode or an intelligent cooking process, the pan drain
valve will close automatically.
4.11 Inserting core temperature probe
CAUTION
Hot core probe
There is a risk of burns if you touch the hot core probe without protective gloves.
1. Always wear protective gloves when working with the hot core probe.
CAUTION
Sharp core probe
You could injure yourself with the tip of the core probe if you do not work carefully with it. This applies in
particular to the sous-vide USB core probe.
1. Always wear protective gloves when working with the hot core probe.
2. After use, attach the core probe to the pan lid at the intended position.
NOTICE
The core probe is hanging out the pan
If you do not attach the core probe to the magnetic holder after use, the core probe may be damaged.
1. After use, attach the core probe to the magnetic holder.
Meat, e.g. steak
To Next Page
Loading...
Need help?
General
