11 | Settings
Operating instructions 73 / 100
Developer logs: Export via time period
a You have connected a USB flash drive to the unit.
1. Press the button Developer logs: Export via time period
>> You can now download the developer logs for a certain period of time.
Service report: Export all
a You have connected a USB flash drive to the unit.
1. Press the button Service report: Export all
>> The service reports are now downloaded to a USB flash drive.
Export error statistics log
a You have connected a USB flash drive to the unit.
1. Press the button Copy the error statistics log to a USB flash drive
>> The error statistics log is saved on the USB flash drive.
11.8 Network settings
If you want to connect the unit to a WiFi network where you have to log in via a website, the WiFi connection
cannot be established.
1. Press the button
2. Press the button Network
3. To activate the function, press the button: ON
4. Press the button WIFI
> A list of all available WiFi networks is displayed. WiFi networks are sorted by signal strength.
5. Select the desired WiFi network.
> You will be asked to enter the password of the WiFi network.
6. To confirm the action, press the button:
> If the connection has been successfully established, the following symbol appears in the footer:
> The WiFi network will be displayed at the top of the list of available WiFi networks.
7. To display the connection details, press this button next to the WiFi network: V
8. To disconnect, press this button in the connection details: Disconnect
9. Press on in the icon bar to return to the overview of the network settings.
>> The name of the WiFi network will be displayed in the WLAN section.
Optimised network settings allow you to connect to wireless networks with hidden SSIDs:
n
Press the button Manual connection with WiFi.
n
You can now enter the network name (SSID) and the associated password.
n
Press the button to connect.
1. Press the button
2. Press the button Network settings
You can find out how to connect your unit to a WiFi network here: Establish a wireless connection [}80]
You can find out how to connect your unit to the network here: Establish network connection [}80]
To Next Page
Loading...
Need help?
General
