11 | Settings
74 / 100 Operating instructions
The Network status button can be used to check whether there is a connection to the router and to the Internet.
11.8.1 WiFi
Here you can include your unit in a WiFi network. Click here for more information: Establish a wireless connection
[}80]
11.8.2 LAN (optional)
You can find out how to connect your unit to the network here: Establishing a network connection [}80]
IP network
Enter the IP address of your unit here.
Gateway
Here you can enter the Gateway IP address.
IP netmask
Here you can enter the IP netmask.
DNS 1
Here you can enter the address of the primary DNS server.
MAC address
Here you can display the MAC address of your unit.
DHCP active
Here you can set if DHCP should be active or inactive
1. To activate the function, press the button: ON
>> The IP address, Gateway and DNS are automatically configured.
11.9 User profile
You can group users into profiles and assign access rights to these profiles. By default, your unit is assigned a
profile that cannot be deleted. You can add up to 10 more profiles.
1. Press the button
2. Press the button User profile
How to create, change and transfer profiles to other cooking systems can be found here: Profile and rights
management [}77]