12 | Kitchen management
80 / 100 Operating instructions
n
Maximum plug length of 45 mm
n
Plug diameter of 18.5 mm
n
Cable diameter of 5.5–7.5mm
CAUTION
The functional parts around the network connection can heat up to over 60 °C
You can burn yourself if you connect a network cable to a unit that is currently in use or has just been in use.
1. Let the unit cool down before connecting the network cable.
1. Unscrew the protective cover.
2. Thread the individual parts of the protective cover onto the network cable.
3. Plug the network cable into the network connection.
4. Screw the protective cover back on.
12.3.2 Establish network connection
a You have all the data for the network connection.
1. Press the button
2. Press the button Network settings
3. Press the button LAN
4. Press the button IP network
5. Enter the IP address.
6. Press the button IP Gateway
7. Enter the IP address of the IP Gateway.
8. Press the button IP Netmask
9. Enter the IP netmask.
10. If you would like a server to assign the network configuration to customers, activate DHCP. Press the button
ON
> Now the IP address, Gateway and DNS are automatically configured.
11. Press the button DNS 1 (preferred)
12. Enter the address of the DNS server.
12.3.3 Establishing a WiFi connection
If you want to connect the unit to a WiFi network where you have to log in via a website, the WiFi connection
cannot be established.
1. Press the button
2. Press the button Network
To Next Page
Loading...
Need help?
General
