6 | Manual cooking
42 / 100 Operating instructions
6.3 Cooking
6.3.1 Temperature range
Minimum temperature cooking liquid Maximum temperature cooking liquid Default setting
30°C Boiling temperature Boiling point; corresponds to
PowerBoost level 1
6.3.2 Cooking food
1. Press the button in the menu bar:
2. Press the button
3. Set the temperature of the pan base.
> The PowerBoost level 1 is automatically activated. You can change the PowerBoost level, select the gentle
cooking function or the Delta-T cooking funciton. You can also cook the food in baskets. Click here for more
information: Cooking parameters [}40]
> You can now decide whether you want to cook food using cooking time or core temperature. Please note that
only one of the two cooking parameters can be selected. It is not possible to combine the cooking parameters.
4. To cook food with the cooking time, press the button:
5. Set the cooking time.
6. To cook the food with the core temperature, press the button:
7. Set the core temperature.
> The unit is heating up. If you preheat the unit with the pan lid closed, the unit will only reach a temperature that
is 3 °C below boiling temperature. This prevents pressurisation in the pan.
> When the unit is preheated, you will be asked to load it.
8. Load the unit.
9. To confirm the action, press the button:
> If the cooking time has elapsed or the core temperature has been reached, an acoustic signal will ask you to
check whether the food has reached the desired result.
10. If the cooking result meets your requirements, take the food out of the pan.
To Next Page
Loading...
Need help?
General
