4 | How to work with the unit
Operating instructions 19 / 100
1. Press the button
2. Set the desired water quantity. Observe the maximum fill volumes. Your setting will be applied automatically
after just a few seconds.
> The unit will be filled with the set water quantity. The water quantity still to be filled will be displayed.
> If you press this button: or the central dial, the automatic water filling will stop.
When using your unit, it is possible to switch the hot water option on and off in the cooking paths.
If the hot water option is active, hot water is used when using automatic filling in the cooking paths. The change
from cold to hot or hot to cold water is easily possible via the selection in the slider.
To Next Page
Loading...
Need help?
General
