5 | Intelligent cooking - iCookingSuite
38 / 100 Operating instructions
1. To display the options, press the button:+
New batch
With this option, you can load the unit with a new batch and continue the cooking process with the defined
cooking parameters.
Time continued
With this option, the cooking process will continue for a certain time. If you select the option at the end of the
cooking path, a window appears where you can set how long you would like the cooking path to be continued for.
1. Select the desired duration.
>> Your setting will be applied automatically after just a few seconds.
If you switch from the cockpit back to the cooking parameters, the overview is greyed out. You cannot change the
cooking parameters. Once the time you have set has expired, you can either unload the unit or continue the
cooking path with an option.
Move
Select this option if you are cooking foods of different sizes or different foods with different cooking levels using
the core probe:
1. When the set core temperature is reached, open the pan lid.
2. Insert the core probe into a larger piece of the food or the food with the higher core temperature.
3. Remove all smaller pieces of food from the pan.
4. Close the pan lid.
5. Press the button
> A window appears in which you can set the core temperature.
6. Choose the desired core temperature.
>> Your setting will be applied automatically after just a few seconds.
Repeat this step until all the food has reached the desired core temperature.
Hold
With this option, the temperature is held at the set value. If you select this option, the food will be held at the
preset temperature or the core temperature. This prevents overcooking. To keep cooking losses as low as
possible, it is recommended that the food only be left in the pan with the Hold option for a short time. In some
cooking processes, such as overnight boiling, the Hold option is the last cooking step and is automatically started
once the desired cooking result has been achieved.
1. To adjust the parameters of the Hold option, press the button:
2. Adjust the parameters as required.
>> When the end of the cooking path has been reached, the Hold cooking step is automatically started.
Boil
With this option, the cooking liquid, a soup or sauce, is brought to the boil.
To Next Page
Loading...
Need help?
General
