To
turn the Simulator feature ON:
When the simulator is ON,
“SIMULATE”flashes
on
each display screen in the message box to advise you
+
SCREEN COlORS
that the simulator is in use and
‘real
world” opera-
tion is not enabled.
‘Iurn
the simulator OFF
pressing
the/-key
and selecting
~FISHFINDlNG
. . .
^_
---_
.
Press the
l-1
key and select
1
FISHFINJMNG
1
with the
softkey.
When
the
FISHFINDING
menu appears,press the
softkey
indicated
forj
SIMULATOR]
to turn the simulator ON. The box below SIMULA-
TOR" indicates which selection is active and the
se-
with
the soltkey.
When
the
FISHFINDING
menu appears, press the
softkey
indicated for SIMULATOR to turn the simulator OFF.
You can use the simulator as you progress through this section to practice
the various operations. Study the illustrations and repeat operations, if
necessary,until you are comfortable and confident.Time spent in becoming
familiar with the unit will strengthen your knowledge and skill in using this
full featured Fishfinder/ Plotter/ Navigator...
where it counts . . . afloat.
3.1.1
The
Keyboard
The
V8010
keyboard could be considered as consisting of four main
operating control groups. They are:
l A Mode
&
Function Keys
r
l B
SofTtkey/Numeric
Keys
EI
l C DirectionKeys
l D
The Receiver Variable
L
Controls
The table on the following page briefly de-
MAIN KEY GROUPS
scribes the function/s of the individual keys of the keypads. More detailed
information on the use of each key in performing the various operations
and the setting of the variable controls appear in paragraphs that follow.
OPERATION 42
To Next Page
Loading...
Need help?
General
