Need help?Do you have a question about the Raytheon V8010 and is the answer not in the manual?
General| Brand | Raytheon |
|---|---|
| Model | V8010 |
| Category | Marine Equipment |
| Language | English |
Procedures for mounting the main display unit.
Guidance on mounting the unit using its yoke assembly on a tabletop or overhead.
Instructions for flush mounting the V8010 using an optional console mounting kit.
Diagram and description of rear panel connections for the echo sounder unit.
Details on connecting the V8010 to the vessel's DC power system.
Information on connecting external navaids and data sources via NMEA.
Comprehensive guide for installing various transducer types.
Factors affecting transducer placement, including acoustic noise.
Detailed steps for installing the 2528L Lexan transducer.
Guidance on preparing and installing the stuffing tube for the transducer.
Instructions for preparing and using a fairing block to ensure proper transducer alignment.
Considerations for selecting the optimal location for hull transducer installation.
Step-by-step procedure for mounting the transducer assembly.
Specific instructions for installing the 2528B Bronze Thru-Hull transducer.
Rules for finding the best mounting location for the 2528B transducer.
Materials and preliminary steps required before installing the 2528B transducer.
Information on using a fairing block with the 2528B transducer.
Procedure for drilling holes required for the 2528B transducer installation.
Detailed process for mounting the 2528B transducer assembly.
Guide for installing the optional Speed/Temperature sensor.
Step-by-step instructions for mounting the Speed/Temperature sensor unit.
Introduction to operating the V8010, covering keypad and display basics.
Description of the V8010's keyboard layout and control groups.
Explanation of essential controls like Power and Brilliance.
Instructions on how to turn the unit ON and OFF using the power keys.
Adjusting display brilliance and controlling keypad backlighting.
Introduction to the main operating display modes: Fishfinding, Plotting, Navigation.
Configuring visual and audio alarms for fishfinding and navigation situations.
Setting the shallow water alarm to alert when depth is at or below a preset level.
Setting the deep water alarm to alert when depth is at or greater than a preset level.
Configuring the fish alarm to detect echoes within a specified depth window.
Setting programmable navigation alarms for waypoints.
Setting an alarm for reaching a waypoint within a specified distance.
Monitoring vessel position while anchored to detect drift.
Alerting when the vessel strays from its intended track line.
Setting an alarm to avoid hazardous areas by marking boundaries.
Procedure for checking and replacing the unit's fuse.
Guidance on replacing the internal lithium battery backup.
A guide to diagnosing and resolving common symptoms and issues.
To Next Page
