Raytheon V8010 User Manual

To Copy, Erase, or protect a particular waypoint or event mark just select
the waypoint using either method listed above. press them key and the
display changes to WAYPOINT-SAVE.
3.432.4 SAVE Operations - Whypoint List
If you press them key on the Waypoint List display, you can perform
some additional operations with the stored waypoint data including the
following:
A. Copying Waypoints
Waypoints can easily be transferred from one
memory location to another using the COPY fea-
ture. This is useful to transfer an EVENT into
another more permanent waypoint memory.
To Copy waypoints: press the lcopyl softkey.
Type waypoint # (from) and waypoint # (to) and
then press-.
Example: VI, 0, 0, 3, 0, 1, 5,-l.
Wpt # 3 is now copied into wpt # 15.
B. Erasing a Waypoint
WAYPOINT SAVE
0
+ COPY WAYWINT
FROM 1_ TO a_
+ ERA? ot4&YPOINT
---
+ PROTECT MARK
+Qgz fj@ or-l=
+ MEASURE WAYPOINTS
PRESS MENU TO RETURN
While on the Waypoint List, place the number of the waypoint to be
“erased”in the highlighted boxon the Waypoint List. Then press the ml
softkey for the WAYPOINT - SAVE menu..
On the WAYPOINT SAVE screen, confirm that the number shown under
ERASEWAYPOINT is correct. Also verifythat the Waypoint Protection feature
for the waypoint is OFF. press the1 ERASE WAYPOINT~ softkey. Press-
to confirm erasure. The waypoint will be erased.
WARNING !
Make sure that the waypoint to be erased is NOT selected as your
current destination. Only waypoints protected “manually”cannot
be accidentally erased.
OPERATION 89

Raytheon V8010 Specifications

General

Brand	Raytheon
Model	V8010
Category	Marine Equipment
Language	English