Ricoh aficio 1013F - 5.1.2 TEST PATTERN PRINTING (SP5-902)

USING SERVICE PROGRAM MODE
SM 5-23 B044/B045/B046
Service
Tables
5.1.2 TEST PATTERN PRINTING (SP5-902)
1. Enter SP mode and select SP5-902.
2. Input the number for the test pattern you wish to print.
3. Press & to access the copy mode display.
4. Select the copy features (paper size, image density, magnification, etc.).
5. Press & again to print the test pattern.
6. After checking the test pattern, press ! key to exit from copy mode.
7. To print other test patterns, repeat steps 2 to 6.
8. When finished, exit SP mode.
No. Test Pattern
0Blank
1 Horiz. lines (1-dot printed line,
1-dot blank line, alternating)
2 Horiz. lines (1-dot printed line,
2-dot blank line, alternating)
3 Horiz. Lines (2-dot printed line,
1-dot blank line, alternating)
4 Horiz. Lines (2-dot printed line,
2-dot blank line, alternating)
5 Grid (1-dot line thickness)
6 Grid (2-dot line thickness)
7 Alternating dots (1 horiz. line of
repeating 1 dot printed, 2 dots
blank; followed by 2 horizontal
lines completely blank; repeating)
8 Solid Black
9——
10 Trimming Area
11 Grayscale, 2 x 2–dot [Horizontal
line of repeating 2 dots printed, 2
dots blank; printed every other
line.]
12 Grayscale, 4 x 4–dot [Horizontal
line of repeating 4 dots printed, 4
dots blank; printed every 4th line.]
13 ——
14 ——
15 ——
16 ——
17 ——
18 ——
19 ——
No. Test Pattern
20 ——
21 Diagonal line pattern, ascending
(1-dot width) [600dpi]
22 Diagonal line pattern, ascending
(2-dot width) [600dpi]
23 Diagonal line pattern, descending
(1-dot width) [600dpi]
24 Diagonal line pattern, descending
(2-dot width) [600dpi]
25 Diagonal line pattern, ascending
(1-dot width) [400dpi]
26 Diagonal line pattern, ascending
(2-dot width) [400dpi]
27 Diagonal line pattern, descending
(1-dot width) [400dpi]
28 Diagonal line pattern, descending
(2-dot width) [400dpi]
——
51 Vertical-line VPM (DFU)
52 Horiz.-line VPM (DFU)
53 Diagonal-line VPM (DFU)
54 Grayscale VPM (DFU)