SPECIAL TOOLS AND LUBRICANTS
SM 3-3 B044/B045/B046
Replacement
and
Adjustment
3.1.9 IMPORTANT
1. The machine will automatically start toner agitation when you install a new
PCU. Be sure to wait for initialization to finish before reopening the front cover
or turning off the main switch.
2. If the optional anti-condensation heater (for the optional paper tray unit) is
installed, keep the copier's power cord plugged in even while the main switch is
off, so that the heater remains energized.
3.2 SPECIAL TOOLS AND LUBRICANTS
Part Number Description Q’ty
A1849501 Optics Adjustment Tools (2 pcs/set) 1 set
A2929500 Test Chart – S5S (10 pcs/set) 1 set
A0299387 Digital Multimeter – Fluke 87 1
N8036701 Flash Memory Card (4MB) 1
N8031000 Case for Flash Memory Card 1
A2579300 Grease Barrierta – S552R 1
52039501 Silicone Grease G-501 1
G0219350 Loopback connector 1
To Next Page
Loading...
