COPIER
B044/B045/B046 1-8 SM
18. Model B046 only: Access SP5-992 and select "2" to print out a full SMC
report. Confirm that the report shows a "YES" for SP7-801-3.
19. Modes B046 only: After connecting the telephone line to the appropriate
telephone wall jack and LINE press the On Hook key on the fax operation
panel, and confirm that you hear a dial tone coming from the monitor speaker.
20. Program the required items, as indicated below.
Initial Programming: Faxless models (B044, B045)
Items to Program (Service Level – SP Mode)
*1
SP No.
Date and time 5-302
Language replacement (Firmware download) 5-827
*1: See Section 5 for SP-mode usage instructions.
Items to Program (User Level)
*2
User Tools
Display contrast
Energy saver level (low power mode)
Reception mode
User Tools →
System Settings
Other items, as necessary *2
*2: Refer to the Operating Instructions for details.
Initial Programming: Fax-equipped models (B046)
Items to Program (Service Level – Service Functions)
*3
Function No.
Country code (System switch 0F) 01
Protocol requirements (G3 switch 0B) - EU only 01
PM call (System switch 01 – bit 0) 01
Country code (NCU parameter 00) 07
Service station's fax number 09
*3: See Section 5.1.1 of the fax service manual for information about using
service functions.
To Next Page
Loading...
