Ricoh aficio 1013F - Led Display; Location

LED DISPLAY
B441 2-2 SM
2.2 LED DISPLAY
2.2.1 LOCATION
The controller uses two LEDs to display error status even while the LED message
is not active.
To see these LEDs, remove the machine’s rear cover.
When the machine is operating normally, LED 1 blinks (on/off) and LED 2 remains
always off. LED 2 only comes on if there is an error; see the next section of the
manual.
Code/Font
ROM
NV
RAM
Engine I/F(CN507)
Option NIB I/F
slot(CN506)
MPU
Program
DIMM
slot(CN505)
Memory
DIMM
slot(CN502)
DIP SW2
RAM
RAM
LED2,1
IC-Card I/F slot(CN511)
IEEE 1284 I/F (CN501)
B441T507.WMF