FUNCTION CONTROL UNIT (FCU)
B044/B045/B046 3-26 SM
3.9.3 DISCHARGE PLATE
1. Right door (☛ 3.3.9)
2. Use a tweezers to remove the
discharge plate [A].
3.10 FUNCTION CONTROL UNIT (FCU)
NOTE: 1) Before starting replacement, use SP5-824 to save SRAM user data from
the existing FCU into a flash memory card. After finishing the
replacement, use SP5-825 to reload the data from the card into the
SRAM on the new FCU. For instructions, see Section 5.1.8.
2) Replacement FCUs ship with the battery jumper switch set to the OFF
position. Be sure to change the jumper switch to the ON position before
installing the replacement FCU.
B046R934.WMF
[A]
To Next Page
Loading...
