TONER SUPPLY CLUTCH
SM 3-19 B044/B045/B046
Replacement
and
Adjustment
3.7 TONER SUPPLY CLUTCH
1. Remove the toner bottle or THM.
2. Copy tray (☛ 3.3.3)
3. Rear cover (☛ 3.3.2)
4. Disconnect the connector on C19 on the FCU.
5. Reach into the machine and push the clutch coupler [A] toward the rear, and at
the same time reach around the back and remove the clip ring [B].
6. Remove the cone and spring, then lift the toner supply clutch mechanism [C]
out of its housing and remove it.
NOTE: When removing, note how the wire goes through the clamp, and also
note where it passes through the rear of the machine.
B046R932.WMF
[A]
[B]
[C]
To Next Page
Loading...
