PCU
B044/B045/B046 3-18 SM
3.6 PCU
1. Open the right door.
NOTE: Do not forget to open the right door. The PCU may become stuck if
you try to remove it while the front door is closed.
2. Open the front door.
3. Remove the toner bottle holder or THM.
NOTE: If working on a toner-bottle model, clean away all spilled toner from the
toner bottle area and from the inside of the front door.
4. Detach the connector [A] and pull out the PCU [B].
NOTE: 1) After installing the new PCU, be sure to remove the Styrofoam piece
and to pull off the two tags. (☛ 1.1.2, Step 10)
2) The machine will automatically detect the new PCU and begin toner
initialization. (☛ 6.10.4)
NOTE: If you accidentally touch the surface of the OPC with your fingers, clean
with a dry cloth. Do not use alcohol, it will dissolve the drum surface.
B046I109.WMF
[A]
[B]
To Next Page
Loading...
