FAX UNIT
SM 1-9 B465
Fax Unit
B465
1.2.3 INITIAL PROGRAMMING
Items to Program (Service Level – Service Functions
*1
)Function No.
Country code (System switch 0F) 01
Protocol requirements (G3 switch 0B) - EU only 01
PM call (System switch 01 – bit 0) 01
Country code (NCU parameter 00) 07
Service station's fax number 09
Items to Program (Service Level – SP Mode
*1
) SP No.
Machine's serial number 5-811
Language replacement (Firmware download) 5-827
PSTN access code (RAM address 4000DB)
PSTN access method (RAM address 4000CD)
Periodic service call (RAM addresses 40054F to 400553)
7-955
*1: See Section 5.1.1 for information about how to enter service functions.
Items to Program (User Administrator Level) User Tools
Monitor volume
Display contrast
Date and Time
Reception mode
Fax Header/Own Name/Own No. (TTI/RTI/CSI)
Fax Features ->
Setup
Reports on/off
Country Code (except NA)
Key Op. Tools
Energy saver level System Settings
Language selection Language
Other initial programming items *2
*2: Refer to the Operating Instructions for details.
To Next Page
Loading...
