MEMORY BOARD (G578/G579/G580)
SM 1-5 B441
Printer Unit
B441
1.4 MEMORY BOARD (G578/G579/G580)
!
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: To install the memory option, the printer option (B441) must be installed
also. Please refer to section 1.2 for the printer controller installation
procedure.
1. Remove the rear cover [A] (5 screws).
2. Remove the controller board [B] from the machine (1 harness and 8 screws or
6 screws if no fax option).
3. Connect the memory board [C] to CN502 on the controller board.
4. Replace the controller board assembly in the machine.
5. Replace the rear cover.
B441I501.WMF
B465I103.WMF
B441I106.WMF
[A]
[B]
[C]
To Next Page
Loading...
