Ricoh aficio 1013F - Service Level Functions; Bit Sw; Function no; How to Enter and Exit Service Mode

SERVICE LEVEL FUNCTIONS
SM 5-1 B465
Fax Unit
B465
5. SERVICE TABLES
5.1 SERVICE LEVEL FUNCTIONS
5.1.1 HOW TO ENTER AND EXIT SERVICE MODE
To Enter Fax Service Mode:
1. Ensure that the machine is in standby mode.
2. Press ! " # $, then hold down
% for more than 3 seconds.
The SP mode main menu appears.
3. Press & to enter the fax service mode.
To Exit Fax Service Mode:
Press the ‘CANCEL’ key to exit the service
mode.
5.1.2 FUNCTION NO.
(1) 01. BIT SW
1. Enter the fax service mode.
2. Press ' (, then ‘OK’.
' - System Switches
( - Scanner Switches
) - Plotter Switches
* - Communication Switches
+ - G3 Switches
Example
1. Press '
2. Scroll through the bit switches.
To increment the bit switch number:
Press ‘→’
To decrement the bit switch number:
Press ‘←’
3. Adjust the bit switch.
Example: To change the value of bit 7,
press ,.
4. To adjust more bit switches, go to step
2.
To finish, press ‘OK’ then ‘CANCEL’.
5. Exit the service mode.
[Service P-Mode] No._
1 Copy 2 Fax 3 Printer
B465S501.WMF
SERVICE FUNCTION
FUNCTION NO.
B465S502.WMF
SERVICE FUNCTION
01.BIT SW
B465S503.WMF
0.SYSTEM 1.SCANNER
2.PLOTTER 3.COMMUNI.
B465S504.WMF
SYS DF :0000 0000
BITSW 00:0000 0000
B465S505
.WMF
SYS DF :0000 0000
BITSW 00:1000 0000
B465S506.WMF