DRUM CLEANING AND TONER RECYCLING
SM 6-39 B044/B045/B046
Detailed
Descriptions
6.13 DRUM CLEANING AND TONER RECYCLING
• Cleaning blade [A] scrapes remaining toner
from the drum after image transfer. Toner
piles up on the blade.
• Toner collect coil [B] transports toner from
pile and drops it onto chute [C], where it
slides down into the development unit
through a slit located at [D].
• At the end of each copy job, the drum turns
about 3 mm in reverse to help clear toner
and other debris from the edge of the
cleaner blade.
B046D566.WMF
B046D307.WMF
[B][A]
[D]
[B]
[C]
[D]
To Next Page
Loading...
