FAX UNIT
B465 1-4 SM
5. Remove the rear cover [A] (! x 5).
6. Cut out area [B] from the rear cover.
7. Connect the supplied harness [C] to the
NCU [D].
8. On Hong Kong models only: On the NCU,
change the position of the TB1 jumper
connector [E] so that the jumper is open. On
all other versions, make sure that the jumper
TB1 is closed.
B465I502.WMF
B465I503.WMF
B465I504.WMF
B465I505.WMF
[B]
[A]
[C]
[D]
[E]
To Next Page
Loading...
