PRINTER INSTALLATION
SM 1-3 B441
Printer Unit
B441
4. Install the controller [A] (1 connector and 8 screws) as shown.
5. Connect the harness [B] into CN3 on the FCU board.
6. Replace the rear cover.
7. Remove the covers [C] and [D] from the operation panel.
8. Install the printer key cover [E], the printer key top [F] and the copy key top [G].
B441I103.WMF
B441I109.WMF
[A]
[B]
[C]
[D]
[E]
[F]
[G]
To Next Page
Loading...
